Fujitsu S510M - ScanSnap - Document Scanner 시작하기 매뉴얼 - 페이지 32
{카테고리_이름} Fujitsu S510M - ScanSnap - Document Scanner에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu S510M - ScanSnap - Document Scanner 35 페이지. Color image scanner
Fujitsu S510M - ScanSnap - Document Scanner에 대해서도 마찬가지입니다: 설치 절차 (3 페이지), 사양 (2 페이지), 빠른 설치 매뉴얼 (2 페이지), 시작하기 매뉴얼 (24 페이지), 청소 지침 (2 페이지), 청소 지침 (2 페이지)
페이지 인쇄
5.3 Cleaning Inside of the ScanSnap
Clean inside of the ScanSnap with a cloth moistened with Cleaner F1.
In an alternating succession of scanning documents, the accumulated paper-powder and dust inside the
ScanSnap causes a scanning error.
As a guideline, clean the ADF every 1000 sheets of documents. Note that this guideline varies according
to the type of documents you are scanning. For example, the ADF must be cleaned more frequently when
scanning documents on that the toner has not been sufficiently fixed on.
Clean the ADF according to the following procedure referring to the illustrations.
The glass surface inside the ADF becomes hot during the ScanSnap operation.
Before you start cleaning the inside of the ScanSnap, disconnect the AC adapter from
CAUTION
the outlet, and wait at least 15 minutes to let the ScanSnap cool down.
Never use water or neutral detergent to clean the inside of the ScanSnap.
ATTENTION
1. Open the ADF while pulling the cover open lever.
Cover open lever
31
ADF
Paper chute