Fujitsu S510M - ScanSnap - Document Scanner 시작하기 매뉴얼 - 페이지 33
{카테고리_이름} Fujitsu S510M - ScanSnap - Document Scanner에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu S510M - ScanSnap - Document Scanner 35 페이지. Color image scanner
Fujitsu S510M - ScanSnap - Document Scanner에 대해서도 마찬가지입니다: 설치 절차 (3 페이지), 사양 (2 페이지), 빠른 설치 매뉴얼 (2 페이지), 시작하기 매뉴얼 (24 페이지), 청소 지침 (2 페이지), 청소 지침 (2 페이지)
페이지 인쇄
2. Clean the following locations with a cloth moistened with Cleaner F1.
For more details, refer to "Chapter 8 Daily Care" in the "ScanSnap S510M Operator's
Guide."
5.4 Cleaning the Carrier Sheet
If the Carrier Sheet is used extensively, dirt and dust may stick onto the surface or the interior and cause
scanning errors. Clean it regularly.
<Cleaning method>
Use a dry, soft cloth, or a soft cloth slightly moistened with Cleaner F1 or a mild detergent to lightly clean
off the dirt and dust from the surface and the interior of the Carrier Sheet.
• Never use paint thinner or other organic solvents.
ATTENTION
• Do not rub too hard. Otherwise, the Carrier Sheet may be scratched or be deformed.
• After cleaning the interior of the Carrier Sheet with Cleaner F1 or a mild detergent, dry the
Carrier Sheet completely before closing it.
• As a guideline, it is recommended to replace the Carrier Sheet every 500 scans.
Refer to "6.2 Purchasing the Carrier Sheet" (page 34) for details on purchasing a Carrier
Sheet.
Pad ASSY
Eject roller (x2)
Plastic roller (x4)
Glass
(x2)
(Located on the ADF cover and the base unit.)
ScanSnap S510M Getting Started
Pick roller
Feed roller
(x2)
32