Brother Quattro 6000D 운영 매뉴얼 - 페이지 34

{카테고리_이름} Brother Quattro 6000D에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother Quattro 6000D 50 페이지. Kit de actualización iii
Brother Quattro 6000D에 대해서도 마찬가지입니다: 매뉴얼 (42 페이지), 운영 매뉴얼 (6 페이지), 사용자 설명서 (48 페이지), 운영 매뉴얼 (29 페이지), 운영 매뉴얼 (21 페이지), (영어) 사용 설명서 (49 페이지), (영어) 사용 설명서 (21 페이지), (영어) 사용 설명서 (48 페이지)

Brother Quattro 6000D 운영 매뉴얼

Additional Functions

After the stitching settings are selected, convert the image data to embroidery data.
*
To clear the entire area and start a new drawing, press
is erased, and the screen appears as it did when My Custom Design was started up (see page 45).
*
To close the application and use the sewing machine, press
drawn is erased (see page 46).
*
To save created data, continue with the procedure described in "Saving Image Data" on page 42.
34
Reducing the Pattern Size
The size of the created pattern can be changed.
Select a size from 50%, 70% and 100%.
Notes
The pattern can also be enlarged or reduced from the embroidering
or embroidery-editing screen of the sewing machine. If the desired
size cannot be selected with this software or if a specific size is
required, adjust the size from the sewing machine.
1
Press
in the pattern drawing screen. The screen
shown at the left appears.
2
Press
or
Press
once to reduce the size to 70%. Press
again to reduce the size to 50%.
To return the size to the original size (100%), press
.
3
Press
. The screen returns to the one displayed
before the stitch settings screen was displayed.
beside
.
. All data that had been drawn
. All data that had been