Brother Quattro 6000D Bedieningshandleiding - Pagina 34

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Brother Quattro 6000D. Brother Quattro 6000D 50 pagina's. Kit de actualización iii
Ook voor Brother Quattro 6000D: Handmatig (42 pagina's), Bedieningshandleiding (6 pagina's), Gebruikershandleiding (48 pagina's), Bedieningshandleiding (29 pagina's), Bedieningshandleiding (21 pagina's), (Engels) Gebruiksaanwijzing (49 pagina's), (Engels) Gebruiksaanwijzing (21 pagina's), (Engels) Gebruiksaanwijzing (48 pagina's)

Additional Functions

After the stitching settings are selected, convert the image data to embroidery data.

To clear the entire area and start a new drawing, press

is erased, and the screen appears as it did when My Custom Design was started up (see page 45).

To close the application and use the sewing machine, press

drawn is erased (see page 46).

To save created data, continue with the procedure described in "Saving Image Data" on page 42.

Reducing the Pattern Size

The size of the created pattern can be changed.

Select a size from 50%, 70% and 100%.

Notes

•

The pattern can also be enlarged or reduced from the embroidering

or embroidery-editing screen of the sewing machine. If the desired

size cannot be selected with this software or if a specific size is

required, adjust the size from the sewing machine.

Press

in the pattern drawing screen. The screen

shown at the left appears.

Press

once to reduce the size to 70%. Press

again to reduce the size to 50%.

To return the size to the original size (100%), press

Press

. The screen returns to the one displayed

before the stitch settings screen was displayed.

beside

. All data that had been drawn

. All data that had been