Fujitsu Point 1600 사용자 설명서 - 페이지 39

{카테고리_이름} Fujitsu Point 1600에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Point 1600 48 페이지. Pen tablet
Fujitsu Point 1600에 대해서도 마찬가지입니다: 제품 참조 (2 페이지)

페이지 인쇄

Infrared Data Transfer Is Not Working

If you are experiencing problems transferring data over the pen tablet's infrared

interface (IrDA port), check the following:

• Can the IrDA port on the pen tablet "see" the IrDA port on the other device? There

must be a direct line-of-sight path between the IrDA port on the Point 1600 pen

tablet and the IrDA port on the other device.

• Ensure that you are pointing the IrDA port on the pen tablet at the port on the

other device. The "viewing angle" from the IrDA port on the pen tablet must not

be more than 15 degrees from center.

• Ensure that the pen tablet is close enough to the other device. The distance

between the two devices must be no more than approximately 3 feet (1 meter).

• The device that you are trying to communicate with must be compliant with the

IrDA Standard Revision 1.1 or lower. If you are unsure, contact your local help

desk.

• Your system must be properly configured before the IrDA port can be used.

Contact your local help desk for assistance if necessary.

Troubleshooting

3-7