Fujitsu Point 1600 사용자 설명서 - 페이지 38

{카테고리_이름} Fujitsu Point 1600에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Point 1600 48 페이지. Pen tablet
Fujitsu Point 1600에 대해서도 마찬가지입니다: 제품 참조 (2 페이지)

페이지 인쇄

System Will Not Respond

If the system will not respond to user input or appears to be "hung", you can turn off

the system by pressing the Reset button. You can then start the system by pressing the

Suspend/Resume button. The location of the Reset button is shown on page 2-14.

Active data will be lost if you press the Reset button. If your

system hangs frequently, there may be problems with your

operating system configuration or pen tablet hardware.

Contact your local help desk for further assistance if

necessary.

Display Screen Is Blank or Difficult to Read

If the display screen is blank or difficult to read, try adjusting the display screen

settings. See "Using Hotpads" on page 2-10 for details on adjusting the display screen

settings. Also, check the following:

• If the display screen is blank, confirm that the pen tablet is running (the Power

LED is on continuously).

• The display contrast setting may be set to extreme high or low levels, causing the

screen to appear blank. Try adjusting the contrast using the hotpads.

• The ambient temperature can affect the display contrast. You may need to adjust

the display contrast periodically, using the hotpads, to compensate for changes in

temperature.

• The pen tablet might be set up to use an external monitor. Tap the Display Select

Hotpad to determine if the pen tablet display screen is selected.

• The video timeout may have expired. To conserve power, the system may be

configured to turn off the display screen after a period of time. Tap the screen to

activate the display.

3-6

Care, Maintenance, and Troubleshooting

Caution