Fujitsu Stylistic CE CT2000 Series 사용 설명서 - 페이지 4

{카테고리_이름} Fujitsu Stylistic CE CT2000 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Stylistic CE CT2000 Series 8 페이지. Bump case
Fujitsu Stylistic CE CT2000 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (8 페이지)

페이지 인쇄

Fujitsu Stylistic CE CT2000 Series 사용 설명서

Installing a Screen Protector

1. To ensure good adhesion, clean the exterior surface of

the HEC window with a soft cotton cloth dampened

with isopropyl alcohol before installing the screen pro-

tector. If streaking occurs, gently buff the surface with a

clean, soft cloth.

2. Install the screen protector in accordance with the

instructions contained in the "Care and Maintenance"

chapter of the system User's Guide.

Additional HEC Information

Zipper Pulls: The wraparound zipper has two zipper pulls.

If you want to use a specific port or jack that is located on

the side of the system, position the two zipper pulls so that

the zipper is open only over the port you want to use.

Handstraps: On the back of the HEC are two overlapping

elastic handstraps that can be used for comfortably and

securely holding the tablet. Position the system in the

desired orientation, slip your hand under the straps, and

grasp the edge of the HEC.

Shoulder Strap: The ends of the elasticized handstraps

have D-rings to which you can attach the shoulder strap.

To secure the shoulder strap, attach the strap clips to two

of the D-rings. The HEC can be carried vertically or hori-

zontally, depending on how you orient the clips.

Pen Holder: Once the system is installed in the HEC, the

pen can be stored in the pen holder on the top of the HEC.