Fujitsu Stylistic CE CT2000 Series Instructions Manual - Page 4
Browse online or download pdf Instructions Manual for Tablet Fujitsu Stylistic CE CT2000 Series. Fujitsu Stylistic CE CT2000 Series 8 pages. Bump case
Also for Fujitsu Stylistic CE CT2000 Series: Installation Manual (8 pages)
Print Page
Installing a Screen Protector
1. To ensure good adhesion, clean the exterior surface of
the HEC window with a soft cotton cloth dampened
with isopropyl alcohol before installing the screen pro-
tector. If streaking occurs, gently buff the surface with a
clean, soft cloth.
2. Install the screen protector in accordance with the
instructions contained in the "Care and Maintenance"
chapter of the system User's Guide.
Additional HEC Information
Zipper Pulls: The wraparound zipper has two zipper pulls.
If you want to use a specific port or jack that is located on
the side of the system, position the two zipper pulls so that
the zipper is open only over the port you want to use.
Handstraps: On the back of the HEC are two overlapping
elastic handstraps that can be used for comfortably and
securely holding the tablet. Position the system in the
desired orientation, slip your hand under the straps, and
grasp the edge of the HEC.
Shoulder Strap: The ends of the elasticized handstraps
have D-rings to which you can attach the shoulder strap.
To secure the shoulder strap, attach the strap clips to two
of the D-rings. The HEC can be carried vertically or hori-
zontally, depending on how you orient the clips.
Pen Holder: Once the system is installed in the HEC, the
pen can be stored in the pen holder on the top of the HEC.
4