Fujitsu D3034 기술 매뉴얼 - 페이지 22
{카테고리_이름} Fujitsu D3034에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu D3034 34 페이지. System board for primergy rx100 s7
페이지 인쇄
Features
Configuration per
channel
1
2
3.2.1.2
Modes of operation
Dual-channel symmetric mode
M em ory s iz e
Figure 2: Dual-channel symmetric and asymmetric mode
– The maximum performance can be achieved in a symmetric dual-channel
configuration. Therefore both channels have to be populated with the same
amount of memory. The DRAM device technology (1Gbit / 2Gbit) may vary
from one channel to the other.
– If the amount of memory differs between the two channels, the system board
will run in dual-channel asymmetric mode.
– Regardless of the mode, all DIMMs will run at the highest common
frequency that is allowed by the SPD Data of the DIMMs and the max. speed
of the selected configuration.
– Single-channel mode is used when 1 memory module is populated in
DIMM 1A.
22
Max. speed
DDR3-1333 / 1600
DDR3-1333 / 1600
B
channe l
Technical Manual
DIMM-2
empty
SR/DR
Dual-channel asymmetric mode
M em ory s iz e A
M em ory s iz e B
A
channe l
DIMM-1
SR/DR
SR/DR
B
D3034 (RX100 S7)