Fujitsu F2MC-16FX QFP-100P 운영 매뉴얼 - 페이지 2

{카테고리_이름} Fujitsu F2MC-16FX QFP-100P에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu F2MC-16FX QFP-100P 14 페이지. For dsu-fr emulator
Fujitsu F2MC-16FX QFP-100P에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지)

페이지 인쇄

PREFACE

Thank you for purchasing the F

DSU-FR*

The F

MC-16FX QFP-100P header type 3 is a header board*

(MB2198-01)*

user system that uses an MB96340 series (QFP-100P) microcontroller from the Fujitsu F

family.

This manual explains how to handle the F

ulator. Read this manual before using the MB2198-501.

Consult a Fujitsu Limited sales or support representative for details on the mass production MCUs

and evaluation MCUs compatible with this product.

*1 : F

*2 : The package is the FPT-100P-M06 (0.65mm lead pitch, 14mm × 20mm body size).

*3 : FR is an abbreviation of FUJITSU RISC CONTROLLER and is a product of Fujitsu Limited.

*4 : Referred to as the "header board"

*5 : Referred to as the "emulator"

*6 : Referred to as the "adapter board"

■ Handling and use

See the following manuals for details on how to handle and use this product, and for precautions on

using the product safely.

• DSU-FR EMULATOR MB2198-01 HARDWARE MANUAL

• DSU-FR EMULATOR F

MANUAL

■ Caution of the product described in this document

The following precautions apply to the product described in this manual.

CAUTION

Cuts

Damage

MC-16FX*

emulator.

and the DSU-FR emulator F

MC is the abbreviation of FUJITSU Flexible Microcontroller.

MC-16FX BGA-416P ADAPTER MB2198-500 OPERATION

The wrong use of a device will give an injury and may cause malfunction on cus-

tomers system.

This product has parts with sharp points that are exposed. Do not touch edge of

the product with your bare hands.

When connect the header board to the user system, correctly position the index

mark (▲) on the NQPACK mounted on the user system with the index mark (▲)

on the header board, otherwise the emulator system and user system might be

damaged.

When mounting a mass production MCU, correctly position pin 1, otherwise the

mass production MCU and user system might be damaged.

QFP-100P*

header type 3 (MB2198-501) for the

used to connect the DSU-FR emulator

MC-16FX BGA-416P adapter (MB2198-500)*

MC-16FX QFP-100P header type 3 for the DSU-FR em-

to a

MC-16FX