Fujitsu F2MC-16FX QFP-100P Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Płyta główna Fujitsu F2MC-16FX QFP-100P. Fujitsu F2MC-16FX QFP-100P 14 stron. For dsu-fr emulator
Również dla Fujitsu F2MC-16FX QFP-100P: Podręcznik użytkownika (34 strony)

Fujitsu F2MC-16FX QFP-100P Instrukcja obsługi
PREFACE
Thank you for purchasing the F
DSU-FR*
The F
2
MC-16FX QFP-100P header type 3 is a header board*
(MB2198-01)*
user system that uses an MB96340 series (QFP-100P) microcontroller from the Fujitsu F
family.
This manual explains how to handle the F
ulator. Read this manual before using the MB2198-501.
Consult a Fujitsu Limited sales or support representative for details on the mass production MCUs
and evaluation MCUs compatible with this product.
*1 : F
*2 : The package is the FPT-100P-M06 (0.65mm lead pitch, 14mm × 20mm body size).
*3 : FR is an abbreviation of FUJITSU RISC CONTROLLER and is a product of Fujitsu Limited.
*4 : Referred to as the "header board"
*5 : Referred to as the "emulator"
*6 : Referred to as the "adapter board"
■ Handling and use
See the following manuals for details on how to handle and use this product, and for precautions on
using the product safely.
• DSU-FR EMULATOR MB2198-01 HARDWARE MANUAL
• DSU-FR EMULATOR F
MANUAL
■ Caution of the product described in this document
The following precautions apply to the product described in this manual.
CAUTION
Cuts
Damage
Damage
2
MC-16FX*
3
emulator.
5
and the DSU-FR emulator F
2
MC is the abbreviation of FUJITSU Flexible Microcontroller.
2
MC-16FX BGA-416P ADAPTER MB2198-500 OPERATION
The wrong use of a device will give an injury and may cause malfunction on cus-
tomers system.
This product has parts with sharp points that are exposed. Do not touch edge of
the product with your bare hands.
When connect the header board to the user system, correctly position the index
mark (▲) on the NQPACK mounted on the user system with the index mark (▲)
on the header board, otherwise the emulator system and user system might be
damaged.
When mounting a mass production MCU, correctly position pin 1, otherwise the
mass production MCU and user system might be damaged.
1
2
QFP-100P*
header type 3 (MB2198-501) for the
4
used to connect the DSU-FR emulator
2
MC-16FX BGA-416P adapter (MB2198-500)*
2
MC-16FX QFP-100P header type 3 for the DSU-FR em-
i
6
to a
2
MC-16FX