Fujitsu F2MC-16FX QFP-100P 사용자 설명서 - 페이지 14

{카테고리_이름} Fujitsu F2MC-16FX QFP-100P에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu F2MC-16FX QFP-100P 34 페이지. For dsu-fr emulator
Fujitsu F2MC-16FX QFP-100P에 대해서도 마찬가지입니다: 운영 매뉴얼 (14 페이지)

페이지 인쇄

3.3 Analog Power Supply Voltage (JP: 11, 13, 15)

The power supply as well as the positive reference voltage for the A/D-converter can be

provided internally or externally.

JP11, JP15 connects analog power supply voltages (AVcc and AVss)

JP13

connects the analog reference voltage AVRH to AVcc

Jumper

JP11 (AVcc)

JP13 (AVRH)

JP15 (AVss)

By default the resistors R11 and R23 are not mounted on the board

Default: JP11, JP13 and JP15 are closed

By default, the A/D-converter supply and reference voltage is same as the microcontroller

supply voltage.

Note:

If JP11 and JP15 are open, the user has to supply an adequate analog voltage supply (AVcc

and AVss) to the A/D-converter.

If JP13 is open, the resistors R11 and R23 define AVRH.

By default the resistors R11 and R23 are not mounted on the board.

FMEMCU-UG-960010-12

SK-96320-80PMC User Guide

Chapter 3 Jumpers and Switches

Setting

Description

Closed

AVcc is connected to Vcc

Open

AVcc is disconnected from Vcc

Closed

AVRH is connected to AVcc

Open

AVRH defined by resistor network

Closed

AVss is connected to GND

Open

AVss is disconnected from GND

- 14 -