Fujitsu F2MC-16FX QFP-100P 사용자 설명서 - 페이지 16

{카테고리_이름} Fujitsu F2MC-16FX QFP-100P에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu F2MC-16FX QFP-100P 34 페이지. For dsu-fr emulator
Fujitsu F2MC-16FX QFP-100P에 대해서도 마찬가지입니다: 운영 매뉴얼 (14 페이지)

페이지 인쇄

3.5 UART"A" (JP: 1, 2, 31)

One RS232-transceiver (U1, X3) can be connected to one of the microcontroller's UART

interfaces.

JP1, JP2 connect UART 2 to the RS232-transceiver (U1, X3)

JP31

Some programs (e.g. Terminals) need a connection between CTS and RTS

Jumper

JP2 (UART"A"RxD)

JP1 (UART"A"TxD)

JP31 (RTS-CTS)

By default, UART2 is connected to UART"A".

3.6 UART"B" (JP: 6, 8, 32)

One RS232-transceiver (U3, X5) can be connected to one of the microcontroller's UART

interfaces.

JP6, JP8 connect UART 3 to the RS232-transceiver (U3, X5)

JP32

Some programs (e.g. Terminals) need a connection between CTS and RTS

Jumper

JP6 (UART"B"RxD)

JP8 (UART"B"TxD)

JP32 (RTS-CTS)

By default, UART3 is connected to UART"B".

UART "B" can be used for serial asynchronous Flash programming.

FMEMCU-UG-960010-12

SK-96320-80PMC User Guide

Chapter 3 Jumpers and Switches

Setting

Description

Closed

SIN2 of the MCU is connected to UART"A"

Open

SIN2 of the MCU is not connected to UART"A"

Closed

SOT2 of the MCU is connected to UART"A"

Open

SOT2 of the MCU is not connected to UART"A"

Closed

RTS and CTS of X3 are connected

Open

RTS and CTS of X3 are not connected

Setting

Description

Closed

SIN3 of the MCU is connected to UART"B"

Open

SIN3 of the MCU is not connected to UART"B"

Closed

SOT3 of the MCU is connected to UART"B"

Open

SOT3 of the MCU is not connected to UART"B"

Closed

RTS and CTS of X5 are connected

Open

RTS and CTS of X5 are not connected

- 16 -