Fujitsu F2MC-8FX Series 운영 매뉴얼 - 페이지 10

{카테고리_이름} Fujitsu F2MC-8FX Series에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu F2MC-8FX Series 21 페이지. 8-bit microcontroller
Fujitsu F2MC-8FX Series에 대해서도 마찬가지입니다: 운영 매뉴얼 (20 페이지), 애플리케이션 노트 (12 페이지), 애플리케이션 노트 (23 페이지), 설정 매뉴얼 (18 페이지), 설정 매뉴얼 (19 페이지), 설정 매뉴얼 (30 페이지), 애플리케이션 노트 (20 페이지), 애플리케이션 노트 (21 페이지), 설정 매뉴얼 (23 페이지), 사용자 설명서 (24 페이지), 설정 매뉴얼 (17 페이지)

페이지 인쇄
Fujitsu F2MC-8FX Series 운영 매뉴얼
■ How to oscillator mounting on a MCU board
Mount the crystal or ceramic oscillator into the crystal oscillator mounting sockets (for the main
clock and subclock) on the MCU board.
The MCU board has one crystal oscillator mounting socket for the main clock and the other for the
subclock. To distinguish them from each other, the board has the "MAIN CLOCK" and "SUB
CLOCK" labels printed near the main clock socket and sub clock socket, respectively. Mount the
crystal or ceramic oscillator along with a capacitor on the MCU board (see "Figure 7").
Crystal oscillator mounting socket
6
GND
Capacitor mounting socket
• For information on the crystal oscillator such as its frequency, refer to the datasheet
for the evaluation MCU.
• For the capacitance of the capacitor, refer to the datasheet for the crystal oscillator,
etc.
• Neither the crystal oscillator nor the capacitor is bundled with this product.
Figure 7 The example of mount of crystal or ceramic oscillator
Capacitor mounting socket
Ceramic oscillator
Crystal oscillator