Fujitsu PRIMERGY TX100 S1 옵션 매뉴얼 - 페이지 29

{카테고리_이름} Fujitsu PRIMERGY TX100 S1에 대한 옵션 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu PRIMERGY TX100 S1 46 페이지. For tx100 s1
Fujitsu PRIMERGY TX100 S1에 대해서도 마찬가지입니다: 사양 (13 페이지), 서비스 보충 설명서 (46 페이지), 기술 매뉴얼 (32 페이지)

페이지 인쇄
Fujitsu PRIMERGY TX100 S1 옵션 매뉴얼
Accessible drives
V
CAUTION!
Keep the dummy module for future use. If you remove the accessible
drive again and do not replace it with a new one, the dummy module
must be reinstalled to comply with EMC regulations and to satisfy
cooling requirements and fire protection measures.
6.2

Installing an accessible 5.25-inch drive

Figure 12: Installing a drive
Ê Push the new drive about halfway into the bay (1).
Ê Connect the data cable to the accessible drive (see the cabling plans in the
Appendix).
Ê Connect the power cable to the accessible drive (see the cabling plans in the
appendix).
Ê Push the drive right into the bay.
Ê Secure the drive with two screws (2).
Ê Close the server (see section
the power outlet, and switch it on.
TX100 S1
Installing an accessible 5.25-inch drive
"Closing the server" on page
Options Guide
38), connect it to
29