Fujitsu PTM900 매뉴얼 - 페이지 16

{카테고리_이름} Fujitsu PTM900에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu PTM900 40 페이지.

PTM900 Mainboard Manual

IDE Device Connectors

The two connectors, IDE1 (PRIMARY)

and IDE2 (SECONDARY), are used for

your IDE hard disk drives, CD drives,

LS-120|drives, or IDE ZIP drives.

Insert the IDE ribbon cable (below) onto the

IDE connector.

The colored stripe (indicated by the arrow head, right) of

the ribbon cable must be the same side as Pin 1.

The two connectors, CPU_FAN and SYS_FAN are linked to the CPU fan and case

fan, respectively. PWR_FAN can be used with the power supply cooling fan. Pin1

is GND, Pin2 is +12V, Pin3 is Signal (PWR_FAN Pin3 is no use).

2-8