Fujitsu PTM900 Manual - Página 16

Procurar online ou descarregar pdf Manual para Placa-mãe Fujitsu PTM900. Fujitsu PTM900 40 páginas.

PTM900 Mainboard Manual

IDE Device Connectors

The two connectors, IDE1 (PRIMARY)

and IDE2 (SECONDARY), are used for

your IDE hard disk drives, CD drives,

LS-120|drives, or IDE ZIP drives.

Insert the IDE ribbon cable (below) onto the

IDE connector.

The colored stripe (indicated by the arrow head, right) of

the ribbon cable must be the same side as Pin 1.

The two connectors, CPU_FAN and SYS_FAN are linked to the CPU fan and case

fan, respectively. PWR_FAN can be used with the power supply cooling fan. Pin1

is GND, Pin2 is +12V, Pin3 is Signal (PWR_FAN Pin3 is no use).

2-8