Fujitsu SK-96390-100PMC 사용자 설명서 - 페이지 19

{카테고리_이름} Fujitsu SK-96390-100PMC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu SK-96390-100PMC 32 페이지. Mb96300 series

2.8 UART"A", UART"B" connector (X3, X5; JP: 3, 5, 31, 32)

Two 9-pin D-Sub female connectors are used

for the serial interface UART"A" (UART0) and UART"B" (UART1).

TXD is the transmit output, RXD is the receive input.

The DTR or RTS signal can be used to generate a reset.

Please use 1:1 cable for PC-connection.

2.8.1 UART A/B (JP: 3, 5, 31, 32)

Jumper

JP3

(DTR/RTS)

JP5

(DTR/RTS)

JP31

(RTS-CTS)

JP32

(RTS-CTS)

SK-96390-100PMC User Guide

Chapter 2 Jumpers and Switches

Connectors X3, X5:

Setting

Description

1-2

DTR signal (pin 6 of X3) is used as reset source

2-3

RTS signal (pin 7 of X3) is used as reset source

1-2

DTR signal (pin 6 of X5) is used as reset source

2-3

RTS signal (pin 7 of X5) is used as reset source

Closed

RTS and CTS of X3 are connected

Open

RTS and CTS of X3 are not connected

Closed

RTS and CTS of X5 are connected

Open

RTS and CTS of X5 are not connected

Table 2-6: UART0/1 Settings

- 19 -

GND DTR RxD TxD

CTS RTS DSR

UG-960017-11