Fujitsu SK-96620_350-64PMC(1) 사용자 설명서 - 페이지 33
{카테고리_이름} Fujitsu SK-96620_350-64PMC(1)에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu SK-96620_350-64PMC(1) 47 페이지. F²mc-16lx/fx family, mb96620/350 series, mb90350 series
페이지 인쇄
5.7 In-Circuit-Programming Connector (X17)
There is a flash-programming socket on the starter-kit, which makes it possible to program
the flash MCU with a special programming adapter. Mode pin MD0 and reset signal are also
available at this connector.
Pin Number
Pin Signal
1
P00_0
2
P00_1
3
DEBUG I/F
4
5
6
7
8
9
10
5.8 Debug Connector (X21)
The MB96600 super series facilitates on-chip debugging via a single-wire system
with the embedded emulator MB2100-01-E. The emulator is connected to the starter
kit via SMA jack.
© Fujitsu Semiconductor Europe GmbH
SK-96620_350-64PMC(1) User Guide
Chapter 5 Connectors
Figure 5-1: In-circuit programming connector
Description
Port pin P00_0
Port pin P00_1
MB966xx: DEBUG I/F, MB963xx: MD0
MOD
MB966xx: MD, MB963xx: MD2
RSTX
MCU reset signal
SIN
UART2 receive data
SOT
UART2 transmit data
SCK
UART2 clock
VCC
Board supply voltage
GND
Ground
Table 5-1: In-circuit programming connector
Figure 5-2: Debug Connector
- 33 -
UG-960028-12