Fujitsu YOKOGAWA AF221 애플리케이션 노트 - 페이지 6

{카테고리_이름} Fujitsu YOKOGAWA AF221에 대한 애플리케이션 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu YOKOGAWA AF221 24 페이지. Flash programmer - f2mc-16lx family 16-bit microcontroller all series

페이지 인쇄

4 Introduction

This application note describes the set up and using of the third party Flash-Programmer

"Yokogawa AF220/AF221".

The programmer allows in-circuit programming of Fujitsu microcontrollers using the serial-

synchronous interface.

The Yokogawa AF220/AF221 can be adapted to different target controller types by changing

the control-module (PC-card). With the FF201 module near all Fujitsu microcontrollers

of the 16LX-series can be programmed. The FF205 module supports the MB91F150-

family (32-Bit), the FF206 module has to be used together with MB91F360-family (32-

Bit).

It can be used as stand-alone system as well as a PC-controlled programmer using the

RS-232C or the Ethernet interface.

The optional software package AZ290 allows to program remotely control application

software created at customers' sites.

User information and system settings can be stored on the PC-card.

4.1 Programmer overview

Figure 1.1 shows the YOKOGAWA Flash-Programmer AF220 and its most important

operating elements.

MCU-AN-390087-E-V10

FLASH PROGRAMMER YOKOGAWA AF220/221

Introduction

Figure 1-1: Aspect of the AF220 Flash-Programmer

- 6 -