Fujitsu YOKOGAWA AF221 애플리케이션 노트 - 페이지 7

{카테고리_이름} Fujitsu YOKOGAWA AF221에 대한 애플리케이션 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu YOKOGAWA AF221 24 페이지. Flash programmer - f2mc-16lx family 16-bit microcontroller all series

페이지 인쇄

4.2 System overview

A typical system environment is depicted in the figures 1-2 to 1-4. Depending on the

operation mode, the programmer can be used as stand-alone programmer or it can be

connected to a PC via RS-232C or Ethernet interface.

When using the programmer as stand-alone system then

the following components have to be ordered

separately:

•

Flash Programmer AF220/221

•

Control Module FF201 for Fujitsu 16LX-series

•

Interface cable AZ210 or AZ211 or AZ212

(see chapter "Target Probe" below)

In case that the programmer wants to be controlled by a PC then additionally the

•

Remote Controller Software Package AZ290 (can be download from homepage) and

•

RS-232C cable AZ221/AZ222 or twisted Pair Ethernet cable

have to be ordered, too

Figure 1-3: PC connection via RS-232C

If an own software front-end wants to be development then the library-package AZ291 has

to be ordered additionally.

FLASH PROGRAMMER YOKOGAWA AF220/221

Introduction

Figure 1-2: Stand-alone Programmer

- 7 -

Figure 1-4: PC connection via Ethernet

MCU-AN-390087-E-V10