Indesit EVOLUTION WE 10 설치 및 사용 지침 - 페이지 4

{카테고리_이름} Indesit EVOLUTION WE 10에 대한 설치 및 사용 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Indesit EVOLUTION WE 10 17 페이지. Indesit washing machine instructions for use

페이지 인쇄

Here I'm in command

Making the right choice is important. And it's easy.

Programme selector knob

Use this knob to select the wash

programme.

To select a programme, you

should turn the knob so that the

symbol/number of the desired

programme is in line with the

pointer on the knob.

Start /Reset

This button allows you to start

the selected wash programme

or to interrupt it.

If you press it briefly, the button

functions as Start, if you press

it for at least

seconds, then it

functions as Reset.

On-off

When button C is pressed, the

washing machine is switched

on, when it is not the machine

is switched off.

Turning the appliance off

does not cancel the selected

programme.

Detergent dispenser

It is divided into three

compartments:

1. Detergent for pre-wash;

2. Detergent for the main cycle wash;

3. Fabric conditioner.

The washing machine is

equipped

with

compartment 4 (provided as an

accessory) for the bleach, to be

inserted in compartment 1.

mode

Display

All the options available are

displayed on the right-hand side.

Use the mode button to select

the desired option, and the rela-

tive symbol will begin flashing.

On the left-hand side, the value

or the status (On-Off) of the

selected option is displayed, and

you can modify it using the

select button.

To access the subsequent

option, press the mode button,

otherwise press button B to start

the wash cycle.

All the options available are listed

below.

Only options relevant to the

selected programme will be

displayed.

Temperature

The display indicates the maximum

temperature relating to the

programme set, which can be

reduced by pressing the select

button right down to cold wash

This option is available on all

wash programmes.

extra

Spin Variation

The display indicates the maximum

speed relating to the programme

Understanding the control panel

set, which can be reduced by

pressing the select button right

down to its total exclusion

During a wash cycle, the selection

of the spin cycle exclusion is

indicated by symbol

This option is available on all wash

programmes except for number 11

and Drain.

Delay Timer

This allows you to delay the start

of the wash cycle by a minimum

of 1 to a maximum of 24 hours

by pressing the select button.

The enabling of the delayed

start is indicated by the symbol

coming on and staying on

until the wash cycle begins.

This option is not available on

the Draining and Spin cycle

programmes.

Easy Ironing

This function allows your washing

to come out of the machine without

creases, making it much easier to

(Off).

iron.

The appliance optimises the

washing conditions according to

the type of fabrics that are being

washed.

It is enabled with programmes

3-5-6-7-8-11 and Rinse cycles.

To enable it, press the select

button until the On sign comes on.

In programmes 6-7-8-11 and Light

Rinse cycles, the wash cycle is

interrupted and the washing is left

to soak in water before the

appliance is drained. To complete

the cycle, press the select button.

During a wash cycle, the enabling

of this option is indicated by

symbol

coming on.

Rinsing level

This increases the efficiency of

the rinse. We recommend that you

select

use it when dealing with a full load

and a great amount of detergent.

There are three levels; press the

select button to select them.

Low

(Off).

Medium

coming on.

High

This option is available on

programmes 1-2-3-4-5-6-7-8

and Rinse cycles.

Stain Erase

Thanks to this command, the

washing machine will carry out a

more intensive wash that

optimises the effectiveness of the

liquid additives, thus allowing more

resistant stains to be removed.

To use this, press the select

button until the On sign comes on.

During a wash cycle, the

selectionof this option is indicated

by symbol

This option is available on

programmes 2-3-5-6-7-8-10 and

Rinse cycles.

Wash Intensity

This allows you to modify the

characteristics of the selected

wash programme, according to

how soiled the washing is. There

are three levels; press the select

button to select them.

Low

Medium

High

This option is available on

programmes 1-2-3-5-6-7-8.

(see page 7)

coming on.