Indesit EVOLUTION WE 10 Kurulum ve Kullanım Talimatları - Sayfa 4
Yıkayıcı Indesit EVOLUTION WE 10 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları indirin. Indesit EVOLUTION WE 10 17 sayfaları. Indesit washing machine instructions for use
Sayfayı Yazdır
Here I'm in command
Making the right choice is important. And it's easy.
Programme selector knob
Use this knob to select the wash
programme.
To select a programme, you
should turn the knob so that the
symbol/number of the desired
programme is in line with the
pointer on the knob.
Start /Reset
This button allows you to start
the selected wash programme
or to interrupt it.
If you press it briefly, the button
functions as Start, if you press
it for at least
3
seconds, then it
functions as Reset.
On-off
When button C is pressed, the
washing machine is switched
on, when it is not the machine
is switched off.
Turning the appliance off
does not cancel the selected
programme.
Detergent dispenser
It is divided into three
compartments:
1. Detergent for pre-wash;
2. Detergent for the main cycle wash;
3. Fabric conditioner.
The washing machine is
equipped
with
an
compartment 4 (provided as an
accessory) for the bleach, to be
inserted in compartment 1.
3
mode
Display
All the options available are
displayed on the right-hand side.
Use the mode button to select
the desired option, and the rela-
tive symbol will begin flashing.
On the left-hand side, the value
or the status (On-Off) of the
selected option is displayed, and
you can modify it using the
select button.
To access the subsequent
option, press the mode button,
otherwise press button B to start
the wash cycle.
All the options available are listed
below.
Only options relevant to the
selected programme will be
displayed.
Temperature
The display indicates the maximum
temperature relating to the
programme set, which can be
reduced by pressing the select
button right down to cold wash
This option is available on all
wash programmes.
extra
Spin Variation
The display indicates the maximum
speed relating to the programme
4
2
1
Understanding the control panel
D
set, which can be reduced by
pressing the select button right
down to its total exclusion
During a wash cycle, the selection
of the spin cycle exclusion is
indicated by symbol
This option is available on all wash
programmes except for number 11
and Drain.
Delay Timer
This allows you to delay the start
of the wash cycle by a minimum
of 1 to a maximum of 24 hours
by pressing the select button.
The enabling of the delayed
start is indicated by the symbol
coming on and staying on
until the wash cycle begins.
This option is not available on
the Draining and Spin cycle
programmes.
Easy Ironing
This function allows your washing
to come out of the machine without
creases, making it much easier to
(Off).
iron.
The appliance optimises the
washing conditions according to
the type of fabrics that are being
washed.
It is enabled with programmes
3-5-6-7-8-11 and Rinse cycles.
To enable it, press the select
button until the On sign comes on.
In programmes 6-7-8-11 and Light
Rinse cycles, the wash cycle is
interrupted and the washing is left
to soak in water before the
3
appliance is drained. To complete
the cycle, press the select button.
During a wash cycle, the enabling
of this option is indicated by
symbol
coming on.
E
C
Rinsing level
This increases the efficiency of
the rinse. We recommend that you
select
use it when dealing with a full load
and a great amount of detergent.
There are three levels; press the
select button to select them.
Low
(Off).
Medium
coming on.
High
This option is available on
programmes 1-2-3-4-5-6-7-8
and Rinse cycles.
Stain Erase
Thanks to this command, the
washing machine will carry out a
more intensive wash that
optimises the effectiveness of the
liquid additives, thus allowing more
resistant stains to be removed.
To use this, press the select
button until the On sign comes on.
During a wash cycle, the
selectionof this option is indicated
by symbol
This option is available on
programmes 2-3-5-6-7-8-10 and
Rinse cycles.
Wash Intensity
This allows you to modify the
characteristics of the selected
wash programme, according to
how soiled the washing is. There
are three levels; press the select
button to select them.
Low
Medium
High
This option is available on
programmes 1-2-3-5-6-7-8.
B
A
(see page 7)
coming on.