Indesit HOTPOINT LUCE DX1032CX 서비스 매뉴얼 - 페이지 39
{카테고리_이름} Indesit HOTPOINT LUCE DX1032CX에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Indesit HOTPOINT LUCE DX1032CX 39 페이지. Built-in touch control electronic multifunction 60 cm double oven
페이지 인쇄
Indesit
Company
4.
Connect the machine to the Electrical
this sequence:
a)
Red
ON: Good Communication between Smart Card Reader and Card.
b)
Red
OFF;
Green
c)
At end,
Green
d) At end, Red ON ---> Download NOT OK.
5. Programming Complete, disconnect the machine from Electrical supply.
6. Remove the Smart Card Reader.
NOTES
a
If the
Red
LED is flashing SLOWLY, and a smart card is inserted, check for the following:
•
Blank/erased smart card (previously used),
•
Incorrectly inserted smart card (check orientation of smartcard chip).
b
If the
Red
LED is flashing RAPIDLY, check for the following:
•
Ensure a smart card has been inserted into the smart card reader,
•
Ensure the smart card has been fully inserted?
Service Manual UK
supply, the LEDs on the Smart Card Reader will light in
Blinking: Download taking place.
ON ---> Download OK.
39 of 39
English