A-Neutronics MS-1215-S6MS 사용 설명서 - 페이지 3

{카테고리_이름} A-Neutronics MS-1215-S6MS에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. A-Neutronics MS-1215-S6MS 4 페이지. 12-outlet surge protected rack mount power strip

페이지 인쇄

TABLE OF CONTENTS

INTRODUCTION

The MS-1215-S6MS offers network-grade surge and noise

suppression in a versatile all-metal cabinet with fixed mounting

flanges for rack mount installation. Uses only (1) rack space (1U)

when installed in any 19 inch EIA standard rack. Features network

grade AC surge suppression with EMI/RFI noise filtering. Includes

(12) outlets (2 front/10 rear), 15ft AC power cord and lighted

Combo Switch / Circuit Breaker. The MS-1215-S6MS is ready for

use out of the box and requires no configuration.

SUPPRESSION: AC: 120V RMS Clamping / 1800 joules / 60,000

amps.

FEATURES

LED STATUS INDICATORS

• The

RED

"Surge" LED is constantly illuminated letting you

know the power strip is busy protecting your electronics.

• The

GREEN

"Ground" LED lets you know you have a good

connection to ground. This is important as ground is needed to

dissipate large power surges.

• The YELLOW "Power" LED means the power strip has

power.

• "SURGE" LED indicator will turn off when the surge

suppression circuit is compromised.

SPECIFICATIONS

• Overall Length: 19 inch

• Number of Receptacles: 12 (2 front, 10 rear)

• Cord Length: 15ft

• Mounting Type: Flange (rack mounting screws not provided)

• Approval: UL Approved

• Maximum Rating: 60Hz, 15A, 120V

• Unit Color: Black

• Housing: Steel

• Dimensions (LxWxD): 17.25 x 3.25 x 1.75 in

• Type of Receptacle: 5-15R (15A 125V) Black Outlet

• Circuit Breaker: 15 amp

• Cord Type: 14/3 SJT

• Type of Plug: NEMA 5-15P (15A 125V) Molded on Plug

• Color of Cord: Black

• Cord Location: Exits the rear of the housing

• Switch: Lighted

• Weight: 5.1 lb (Unit only) / 5.5 lb (Net)

As product improvement is continuous, specifications subject to

change and without notice.

This power strip gives a

constant display of the

three most critical points

on a surge protector.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the

PSU if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. We assume no responsibility for any

infringements of patents or other rights of third parties which

may result from its use.

We assume no responsibility for any inaccuracies that may be

contained in this document. We make no commitment to update

or to keep current the information contained in this document.

We reserve the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer file, in any form or by any means

— electronic, mechanical, magnetic, optical, chemical, manual,

or otherwise — without express written permission and consent.

Version 1.5 JULY 2020

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may

be trademarks of the companies with which they are associated.