A-Neutronics MS-1215-S6MS Руководство по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Устройство защиты от перенапряжения A-Neutronics MS-1215-S6MS. A-Neutronics MS-1215-S6MS 4 страницы. 12-outlet surge protected rack mount power strip
Печатать страницу
TABLE OF CONTENTS
INTRODUCTION
The MS-1215-S6MS offers network-grade surge and noise
suppression in a versatile all-metal cabinet with fixed mounting
flanges for rack mount installation. Uses only (1) rack space (1U)
when installed in any 19 inch EIA standard rack. Features network
grade AC surge suppression with EMI/RFI noise filtering. Includes
(12) outlets (2 front/10 rear), 15ft AC power cord and lighted
Combo Switch / Circuit Breaker. The MS-1215-S6MS is ready for
use out of the box and requires no configuration.
SUPPRESSION: AC: 120V RMS Clamping / 1800 joules / 60,000
amps.
FEATURES
LED STATUS INDICATORS
• The
RED
"Surge" LED is constantly illuminated letting you
know the power strip is busy protecting your electronics.
• The
GREEN
"Ground" LED lets you know you have a good
connection to ground. This is important as ground is needed to
dissipate large power surges.
• The YELLOW "Power" LED means the power strip has
power.
• "SURGE" LED indicator will turn off when the surge
suppression circuit is compromised.
SPECIFICATIONS
• Overall Length: 19 inch
• Number of Receptacles: 12 (2 front, 10 rear)
• Cord Length: 15ft
• Mounting Type: Flange (rack mounting screws not provided)
• Approval: UL Approved
• Maximum Rating: 60Hz, 15A, 120V
• Unit Color: Black
• Housing: Steel
• Dimensions (LxWxD): 17.25 x 3.25 x 1.75 in
• Type of Receptacle: 5-15R (15A 125V) Black Outlet
• Circuit Breaker: 15 amp
• Cord Type: 14/3 SJT
• Type of Plug: NEMA 5-15P (15A 125V) Molded on Plug
• Color of Cord: Black
• Cord Location: Exits the rear of the housing
• Switch: Lighted
• Weight: 5.1 lb (Unit only) / 5.5 lb (Net)
As product improvement is continuous, specifications subject to
change and without notice.
This power strip gives a
constant display of the
three most critical points
on a surge protector.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the
PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. We assume no responsibility for any
infringements of patents or other rights of third parties which
may result from its use.
We assume no responsibility for any inaccuracies that may be
contained in this document. We make no commitment to update
or to keep current the information contained in this document.
We reserve the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means
— electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise — without express written permission and consent.
© Copyright 2020. All Rights Reserved.
Version 1.5 JULY 2020
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may
be trademarks of the companies with which they are associated.
1