A-Neutronics NP-26024 사용 설명서 - 페이지 5

{카테고리_이름} A-Neutronics NP-26024에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. A-Neutronics NP-26024 8 페이지. 24-outlet lcd display vertical power strip 20amp

페이지 인쇄

LCD DISPLAY METER FUNCTION

METER FUNCTION

RE-SET KWH AND CLOCK

Power cycle the unit by turning it OFF and then ON again. This will reset the KWH and clock.

SET OVER CURRENT WARNING LEVEL

This power strip is designed to operate at 20Amps. Changing this Over Current Warning Level value does not allow more then the

specified amperage as specified on the product label.

1. Press "SET" button for (3) seconds.

2. Press "FNC" button so the display is either 15A or 30A.

3. Press "SET" button to select the new setting.

4. Press "FNC" button to return to normal operation.

(8) FUNCTIONS PROVIDED

Plug in the power strip and it starts to display current power supply status

•

Voltage

•

Amp

•

Watt

•

Kwh

•

Runtime Clock

No start button required. FUNCTION and SET buttons are located on the right side of the

LCD Display.

OPERATION

1. Plug in the strip, the display will show the voltage reading.

2. Press "FNC" button, to show amperage reading.

3. Press "FNC" button again, to show watt reading.

4. Press "FNC" button again, to show VA (apparent power) reading.

5. Press "FNC" button again, to show Hz (frequency) reading.

6. Press "FNC" button again, to show PF (power factor) reading.

7. Press "FNC" button again, to show KWH (kilo watt per hour) reading.

8. Press "FNC" button again, to show runtime (clock).

OVER VOLTAGE AND OVER CURRENT WARNING

1. LCD display will show "OUP" when the input voltage is over 145V.

2. LCD display will "blink" when the input current is over 20A.

FUNCTION

Volts

Amps

Watts

Frequency

Power Factor

KWh

KWh hour

RANGE

ACCURACY

95.0~125 Vrms

0.2%

0.00~20.0 Amps

0.3%

2500 Watt

0.5%

2500 VA

0.5%

47.0~63.0Hz

+/- 0.1Hz

0.00~1.00

0.01%

0.00~9999

.5%

0.00~9999

30ppm