A-Neuvideo HD-44G 사용 설명서 - 페이지 4

{카테고리_이름} A-Neuvideo HD-44G에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. A-Neuvideo HD-44G 6 페이지. Ethernet (tcp) set up
A-Neuvideo HD-44G에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지), 사용 설명서 (20 페이지)

페이지 인쇄
A-Neuvideo HD-44G 사용 설명서
SETUP THE NETWORK (2)
STEP 2. CHANGE THE IP ADDRESS OF THE UNIT
(2-1) Open the A-Neuvideo AP and enter fi nd Ethernet Settings fi nd Setting. Click Search to detect the presence of the unit. Click on
the detected IP of the unit. If the unit is not detected, return to Step 1 and reset the IP address of your computer.
Enter Ethernet Settings fi nd Setting.
Unit IP detected
(2-2) After you click the unit IP, the box will be checked off. Then, you can begin to select the options on the left. Look for the Network
Settings area, get the DHCP Server to Enable. Then, change the fi rst three numbers of Static IP Address and Static Default Gateway
to the ones noted in step 1.2-5. Then, click Submit. (If the IP address 192.168.1.3 has already been in use in your network, you have to
assign a different number to the unit, for example, 192.168.1.6.)
3