AEG ARCTIS 1333-6 i 작동 및 설치 지침 - 페이지 11
{카테고리_이름} AEG ARCTIS 1333-6 i에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG ARCTIS 1333-6 i 24 페이지. Aeg integrating freezer arctis
AEG ARCTIS 1333-6 i에 대해서도 마찬가지입니다: 운영 및 설치 매뉴얼 (23 페이지), 작동 및 설치 지침 (24 페이지)
페이지 인쇄Defrosting
The freezer will become progressively covered with frost. This should
be removed with the special plastic scraper provided, whenever the
thickness of the frost exceeds 4 mm. During this operation it is not
necessary to switch off the power supply or to remove the foodstuffs.
However when the ice becomes very thick on the inner liner, comple-
te defrosting should be carried out as follows:
1.
Remove the frozen food from
the freezer, wrap it in several
layers of newspaper and put it
in a very cool place.
2.
Switch off the appliance and
pull out the plug, or turn the
temperature regulator to Ò0Ó.
3.
Leave the freezer compart-
ment door open.
4.
Insert the plastic scraper into
the recess provided under the
defrost water channel and pla-
ce a collecting basin under it.
5.
Once defrosting is completed keep the scraper for future use;
6.
Turn the thermostat control knob to the required setting or replace the
plug in the power socket.
Warning!
Never use metal tools to scrape off the frost
Do not use a mechanical device or any artificial means to speed up
the thawing process other than those recommended by the manufac-
turer.
A temperature rise of the frozen food packs, during defrosting , may
shorten their safe storage life.
11