AEG ARCTIS 1333-6 i Bedienings- en installatie-instructies - Pagina 11

Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} AEG ARCTIS 1333-6 i. AEG ARCTIS 1333-6 i 24 pagina's. Aeg integrating freezer arctis
Ook voor AEG ARCTIS 1333-6 i: Bedienings- en installatiehandleiding (23 pagina's), Bedienings- en installatie-instructies (24 pagina's)

Pagina afdrukken

Defrosting

The freezer will become progressively covered with frost. This should
be removed with the special plastic scraper provided, whenever the
thickness of the frost exceeds 4 mm. During this operation it is not
necessary to switch off the power supply or to remove the foodstuffs.
However when the ice becomes very thick on the inner liner, comple-
te defrosting should be carried out as follows:
1.
Remove the frozen food from
the freezer, wrap it in several
layers of newspaper and put it
in a very cool place.
2.
Switch off the appliance and
pull out the plug, or turn the
temperature regulator to Ò0Ó.
3.
Leave the freezer compart-
ment door open.
4.
Insert the plastic scraper into
the recess provided under the
defrost water channel and pla-
ce a collecting basin under it.
5.
Once defrosting is completed keep the scraper for future use;
6.
Turn the thermostat control knob to the required setting or replace the
plug in the power socket.
Warning!
Never use metal tools to scrape off the frost
Do not use a mechanical device or any artificial means to speed up
the thawing process other than those recommended by the manufac-
turer.
A temperature rise of the frozen food packs, during defrosting , may
shorten their safe storage life.
11