AEG 825 D 설치 및 운영 지침 매뉴얼 - 페이지 13
{카테고리_이름} AEG 825 D에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 825 D 20 페이지. Cooker hood
AEG 825 D에 대해서도 마찬가지입니다: 설치 및 운영 지침 매뉴얼 (19 페이지), 작동 및 설치 지침 (19 페이지)
페이지 인쇄
Maintenance and care
The hood must always be disconnected from the mains
power supply before beginning any maintenance work.
Metal grease filter
The purpose of the grease filters is to aspirate grease particles
which form during cooking and it must always be used, either in
extraction or recirculation mode.
Attention: the metal grease filters must be removed and washed,
either by hand or in the dishwasher, every four weeks.
Open the metal grease filter
Push the filters towards the
back of the unit and then pull it
down and out.Fig. 4.
Hand washing
Soak grease filters for about one hour in hot water with a grease-
loosening cleaner, then rinse off thoroughly with hot water. Repeat
the process if necessary. Refit the grease filters when it are dry.
Dishwasher
Place the grease filters in a dishwasher. Select the most intensive
washing programme and highest temperature, at least 65°C.
Repeat the process if necessary. Refit the grease filters when they
are dry.
When washing the metal grease filter in the dishwasher a slight
discoloration of the filter can occur, this does not have any impact
on its performance.
Clean the inner housing using a hot detergent solution only (never
use caustic detergents, abrasive powders or brushes).
Fig. 4
13