AEG 825 D Installation And Operating Instructions Manual - Page 13

Browse online or download pdf Installation And Operating Instructions Manual for Ventilation Hood AEG 825 D. AEG 825 D 20 pages. Cooker hood
Also for AEG 825 D: Installation And Operating Instructions Manual (19 pages), Operating And Installation Instructions (19 pages)

Print Page

Maintenance and care

The hood must always be disconnected from the mains

power supply before beginning any maintenance work.

The purpose of the grease filters is to aspirate grease particles

which form during cooking and it must always be used, either in

extraction or recirculation mode.

Attention: the metal grease filters must be removed and washed,

either by hand or in the dishwasher, every four weeks.

Open the metal grease filter

Push the filters towards the

back of the unit and then pull it

down and out.Fig. 4.

Hand washing

Soak grease filters for about one hour in hot water with a grease-

loosening cleaner, then rinse off thoroughly with hot water. Repeat

the process if necessary. Refit the grease filters when it are dry.

Dishwasher

Place the grease filters in a dishwasher. Select the most intensive

washing programme and highest temperature, at least 65°C.

Repeat the process if necessary. Refit the grease filters when they

are dry.

When washing the metal grease filter in the dishwasher a slight

discoloration of the filter can occur, this does not have any impact

on its performance.

Clean the inner housing using a hot detergent solution only (never

use caustic detergents, abrasive powders or brushes).

Fig. 4