AEG 825 D 설치 및 운영 지침 매뉴얼 - 페이지 9
{카테고리_이름} AEG 825 D에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 825 D 20 페이지. Cooker hood
AEG 825 D에 대해서도 마찬가지입니다: 설치 및 운영 지침 매뉴얼 (19 페이지), 작동 및 설치 지침 (19 페이지)
페이지 인쇄
Installation - Fig. 3
Put the template onto the wall (1) and drill two Ø12mm holes
(2).
Fit two hooks (3) on the drilled holes.
Hang the hood on the hooks and adjust the position of the
hood using the two screws on the bottom of the hooks (5).
Remove the metal filters (4) and mark two points (6).
Remove the hood and drill two Ø8mm holes on the marked
points.
Fit two Ø8mm wall dowels (7), Hang again the hood and fix
the hood definitively with two screws 5X45 (8).
Fix the chimney support (10) with two screws 5 x 45 mm (9)
and two wall dowels (11) on the wall close to the ceiling.
For exhausting version: Fit the connection ring (S) on the
top of the hood with two screws Ø 3,5 x 6,5 mm (12S) then
fit an exhausting pipe long enough to reach the outside
(13S).
For recycling version: Fix definitively the deflector (13K)
on the top of the hood with two screws Ø 3,5 x 6,5 mm
(12K).
Prepare the electric connection (14) (see relative chapter).
Fit the chimney (15) and fix it on the chimney support with
two screws 3,0 x 9 mm (16).
The lower part of the chimney must be slided down and
inserted on the housing on the upper part of the hood (18).
Fit the two grids (17) on both sides of the chimney.
9