AEG 8359 D 설치 및 운영 지침 매뉴얼 - 페이지 3

{카테고리_이름} AEG 8359 D에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 8359 D 18 페이지. Fume extractor hood

Introduction

The hood is supplied as an extractor unit and can also be used with

a filtering function by fitting activated carbon filters (special

accessory).

You will need original AEG activated carbon filters for this function

(see Special Accessories).

The air is forced out through a hose fitted to the top of the hood

A. Fig. 1.

The outlet hose must have a diameter of 150 mm (special

accessory) for the filtering version.

Fit the connection ring above the hood with two screws then fir an

exhausting pipe long enough to reach the outside. Fig. 1.

If the cooking vapour is passed through an outside wall, you will

need an MKZ telescopic wall pipe (with intake and

ventilation) E-Nr.:942 118 609 (150 mm Ø) from our range of

special accessories.

Fig. 1