AEG Competence 6292D-M 작동 및 설치 지침 - 페이지 6
{카테고리_이름} AEG Competence 6292D-M에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG Competence 6292D-M 18 페이지.
![AEG Competence 6292D-M 작동 및 설치 지침](/uploads/products/server2/255335/255335.png)
Fix the air evacuation pipe H (not supplied) onto the connection flange
(Fig.10)
Unscrew the 2 screws G and rest the lower chimney piece above the cooker
hood (Fig.11).
If the cooker hood is supplied with a lower chimney piece that must be fixed
to the hood body with screws, remove the anti-grease filters from the hood
by acting on the relevant handles (Fig.12). Then screw the lower chimney
piece pipe to the inside of the hood, using screws P (Fig.13). Re-locate the
filters in their seat.
Use & Maintenance
It is recommended to operate the appliance prior to cooking
It is recommended to leave the appliance in operation for15 minutes after
cooking is terminated in order to completely eliminate cooking vapours and
odours
The proper function of the cooker hood is conditioned by the regularity of
the maintenance operations, in particular, the active carbon filter
The anti-grease filters capture the grease particles suspended in the air,
and are therefore subject to clogging according to the frequency of the use
of the appliance
In order to prevent fire hazard, it is recommendable to clean the filter at a
maximum of 2 months by carrying out the following instructions:
-
Remove the filters from the cooker hood and wash them in a solution
of water and neutral liquid detergent, leaving to soak.
-
Rinse thoroughly with warm water and leave to dry.
-
The filters may also be washed in the dishwasher.
The aluminium panels may alter in colour after several washes. This is not
cause for customer complaint nor replacement of panels.
The active carbon filters purify the air that is replaced in the environment.
6