AEG Competence 6292D-M 작동 및 설치 지침 - 페이지 4

{카테고리_이름} AEG Competence 6292D-M에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG Competence 6292D-M 18 페이지.

Before connecting the model to the electricity network

Check the data plate (positioned inside the appliance) to ascertain that the voltage

and power correspond to the local electrical requirements. If in doubt contact a

qualified electrician.

Installation Instructions

Qualified technicians must carry out the installation and electrical connections of

the appliance. We recommend that you contact our customer care center on

0860 234 481/2/3 for details of a qualified technician.

For the installer

The appliance has been manufactured as a class I, therefore earth cable is

necessary.

The connection to the mains is carried out as follows:

BROWN = L line

BLUE = N neutral

Yellow and green wire =Earth lead

The cooker hood must be installed so that that the plug is easily accessible.

An omnipolar switch with a minimum aperture of 3mm between contacts, in

line with the electrical load and local standards, must be placed between

the appliance and the network in the case of direct connection to the

electrical network.

The minimum distance between the support surfaces of the cooking pots on

the cooker top and the lowest part of the cooker hood must be at least 65

cm. If a connection flue composed of two parts is used, the upper part must

be placed inside the lower part.

Do not connect the cooker hood exhaust to the same conductor used to

circulate hot air or for evacuating fumes from other appliances generated

by other than an electrical source.