Kohler 20341T-PNE-CP 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} Kohler 20341T-PNE-CP에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler 20341T-PNE-CP 10 페이지. Pneumatic in-wall tank with frame short height

4. Fit the waste pipe and the flush pipe covers.

S-trap installation

1. Loosen the screw on waste pipe support

bracket if required.

2. Insert S-trap waste pipe into the waste pipe

support bracket.

3. Adjust the pipe position and tighten the

waste pipe support bracket screw to secure

the discharge elbow.

4. Insert the S-trap waste pipe lower end into

discharge port.

5. Fit the waste pipe and the flush pipe covers.

Connecting water inlet hose

● Ensure the water tank internal shut off valve is OFF.

Note: Turn anti-clockwise to close and clockwise to open.

● Connect the water inlet hose (not supplied) to the tank

water inlet.

1310920-A02-A

Flush pipe

cover

Waste pipe cover

S-trap waste pipe

S-trap

waste pipe

Waste pipe

support bracket

Flush pipe

Waste pipe cover

Tank water inlet

Water inlet

hose

-4-

Waste connector

Waste pipe

support bracket

Tank frame

Bottom of the

S-trap waste pipe

Discharge port

Tan

Frame

Flush pipe cover