AEG protect d. 3000 운영 및 설치 매뉴얼 - 페이지 5

{카테고리_이름} AEG protect d. 3000에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG protect d. 3000 19 페이지. Aeg cooktop user manual
AEG protect d. 3000에 대해서도 마찬가지입니다: 작동 및 설치 지침 (17 페이지)

페이지 인쇄

Description of the Appliance

Extractor version

• The hood is supplied as an extractor unit

and can also be used with a filtering

function by fitting one charcoal filter

(special accessory).

• You will need original AEG charcoal filter

for this function (see Special Accessories).

• The air is discharged to the outside through

a pipe, which must be fitted to connection

flange D. Fig. 1.

• In order to obtain the best performance the

hose should have a diameter equal to the

outlet hole.

Should there already be a pipe of diameter

125 mm that ducts to the outside through

the walls or roof, it is possible to use the

150/125 mm reduction flange provided. In

this case the hood will be slightly more

noisy.

Filter Version

• The air is filtered through an charcoal filter

and returned to the kitchen through the top

grill of the outlet pipe.

• You will need an original AEG KF20

charcoal filter for the filtering function. (See

Special Accessories).

• Assemble the deflector (3 parts): the

three parts must be fixed with 2 screws Ø

3.5 13 mm, the extension of the deflector

is adjustable and must correspond to the

width of the chimney flue support, to which

it must be fixed.

Fix the deflector using 4 screws Ø 2,9x6.5

mm. Fig. 2.

• Optionally, the position of the chimney

elements can be changed.

When using the hood in the filter version

the chimney must be fixed at the top, with

the air outlet grill at the side.

Fig. 1

Fig. 2