AEG protect d. 3000 Kullanım ve Kurulum Kılavuzu - Sayfa 5
Havalandırma Davlumbazı AEG protect d. 3000 için çevrimiçi göz atın veya pdf Kullanım ve Kurulum Kılavuzu indirin. AEG protect d. 3000 19 sayfaları. Aeg cooktop user manual
Ayrıca AEG protect d. 3000 için: Çalıştırma ve Kurulum Talimatları (17 sayfalar)
Sayfayı Yazdır
Description of the Appliance
Extractor version
• The hood is supplied as an extractor unit
and can also be used with a filtering
function by fitting one charcoal filter
(special accessory).
• You will need original AEG charcoal filter
for this function (see Special Accessories).
• The air is discharged to the outside through
a pipe, which must be fitted to connection
flange D. Fig. 1.
• In order to obtain the best performance the
hose should have a diameter equal to the
outlet hole.
Should there already be a pipe of diameter
125 mm that ducts to the outside through
the walls or roof, it is possible to use the
150/125 mm reduction flange provided. In
this case the hood will be slightly more
noisy.
Filter Version
• The air is filtered through an charcoal filter
and returned to the kitchen through the top
grill of the outlet pipe.
• You will need an original AEG KF20
charcoal filter for the filtering function. (See
Special Accessories).
• Assemble the deflector (3 parts): the
three parts must be fixed with 2 screws Ø
3.5 13 mm, the extension of the deflector
is adjustable and must correspond to the
width of the chimney flue support, to which
it must be fixed.
Fix the deflector using 4 screws Ø 2,9x6.5
mm. Fig. 2.
• Optionally, the position of the chimney
elements can be changed.
When using the hood in the filter version
the chimney must be fixed at the top, with
the air outlet grill at the side.
66
D
Fig. 1
Fig. 2