A-Neuvideo ANI-QUAD-LITE-4K 사용 설명서 - 페이지 8

{카테고리_이름} A-Neuvideo ANI-QUAD-LITE-4K에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. A-Neuvideo ANI-QUAD-LITE-4K 12 페이지. 4x1 hdmi quad multi-viewer w/ seamless switcher
A-Neuvideo ANI-QUAD-LITE-4K에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지)

페이지 인쇄

NEUVIDEO

Wideband IR (30KHz---60KHz) introduction

IR BLASTER (TX):

To control the source: Plug the IR Blaster into IR TX port of the transmitter unit. Place the blaster in front of the IR

eye of the source.

IR RECEIVER (RX):

To control the source: Plug the IR Receiver into IR RX port of the receiver unit. Place the receiver at or near the display.

Detail description of displa y modes

The quad multi-viewer has (3) display modes.

MODE 1

MODE1:

The quad multi-viewer divides the (4) HD Inputs into the same size displays on (1) screen. Switch the Inputs using the buttons on

the front panel or IR remote, and the HDMI Output audio will correspond to the selected Input source.

MODE2:

The quad multi-viewer divides the (4) HD Inputs into (1) large and (3) smaller picture displays on (1) screen. Switch the Inputs using

the buttons on front panel or IR remote, and the bigger picture will correspond to the selected Input source. The HDMI Output audio follows

the bigger picture source.

MODE3:

The quad multi-viewer will separate and display the (4) HD Inputs individually and become a seamless switcher.

MODE 2

CONNECT & OPERATE

MODE 3