A-Neuvideo ANI-QUAD-LITE-4K Manual de instruções - Página 8
Procurar online ou descarregar pdf Manual de instruções para Monitor A-Neuvideo ANI-QUAD-LITE-4K. A-Neuvideo ANI-QUAD-LITE-4K 12 páginas. 4x1 hdmi quad multi-viewer w/ seamless switcher
Também para A-Neuvideo ANI-QUAD-LITE-4K: Manual de instruções (12 páginas)
Imprimir página
A
NEUVIDEO
Wideband IR (30KHz---60KHz) introduction
IR BLASTER (TX):
To control the source: Plug the IR Blaster into IR TX port of the transmitter unit. Place the blaster in front of the IR
eye of the source.
IR RECEIVER (RX):
To control the source: Plug the IR Receiver into IR RX port of the receiver unit. Place the receiver at or near the display.
Detail description of displa y modes
The quad multi-viewer has (3) display modes.
MODE 1
MODE1:
The quad multi-viewer divides the (4) HD Inputs into the same size displays on (1) screen. Switch the Inputs using the buttons on
the front panel or IR remote, and the HDMI Output audio will correspond to the selected Input source.
MODE2:
The quad multi-viewer divides the (4) HD Inputs into (1) large and (3) smaller picture displays on (1) screen. Switch the Inputs using
the buttons on front panel or IR remote, and the bigger picture will correspond to the selected Input source. The HDMI Output audio follows
the bigger picture source.
MODE3:
The quad multi-viewer will separate and display the (4) HD Inputs individually and become a seamless switcher.
MODE 2
7
CONNECT & OPERATE
MODE 3