Kohler Finial K-316 설치 매뉴얼 - 페이지 10

{카테고리_이름} Kohler Finial K-316에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler Finial K-316 48 페이지. Bidet faucet
Kohler Finial K-316에 대해서도 마찬가지입니다: 설치 및 관리 매뉴얼 (28 페이지)

페이지 인쇄

Washer

Dish

Washer

Nut

End Body

Outlet

End Body

O-Ring

Hose

8. Handle Valve Installation

Remove and save the dished washer and nut from the valve

bodies.

Install a ﬂexible hose to each valve body outlet. Tighten securely,

but do not overtighten.

Apply a bead of plumbers putty or other sealant to the underside

of the escutcheons according to the manufacturer's instructions.

NOTE: The valve body marked "COLD" with blue lettered tape

attached to the tube should be installed to the right of the faucet.

Insert the valve bodies into the proper mounting holes.

From the underside of the bidet, slide a dish washer, washer, and

nut onto each valve body.

Rotate each valve body until the copper tubing faces toward the

outside of the bidet and the outlets face each other.

Slide a washer and loosely thread a nut onto each valve body.

Firmly hold the valve bodies in place and then securely tighten

the nuts with a wrench. Do not overtighten.

Remove any excess putty or sealant.

1010448-2-F

End Body

Escutcheon

Apply Plumbers

Putty.

Disc Washer

(When Required)

Washer

Nut

Kohler Co.