Kohler Finial K-316 설치 매뉴얼 - 페이지 9

{카테고리_이름} Kohler Finial K-316에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler Finial K-316 48 페이지. Bidet faucet
Kohler Finial K-316에 대해서도 마찬가지입니다: 설치 및 관리 매뉴얼 (28 페이지)

페이지 인쇄

Stopper

Body

Apply

thread

sealant.

Tailpiece

7. Complete Drain Installation-Style B

Press the seal into the seal hole on the body.

Insert the stopper into the ﬂange.

For regular installations, insert the short end of the rod into the

body seal hole and under the stopper. For vandal-resistant

installations, ﬁt the rod through the hole in the stopper. Hand

tighten the body nut.

Remove and adjust the stopper as needed so it lifts about 3/8" (1

cm) when opened. To adjust, rotate the threaded stopper rod in or

out as needed. Retighten the stopper nut.

Apply thread sealant tape to the tailpiece threads, and thread the

tailpiece to the body. Tighten the tailpiece securely.

Slide one end of the clip onto the rod. Slide the link onto the rod

with the thumbscrew facing the back of the ﬁxture.

Squeeze the other end of the clip, aligning the hole with the rod.

Move the link to the proper position by squeezing the clip and

sliding it along the rod.

Insert the lift rod into the hole in the faucet and then into the

hole in the link.

Tighten the thumbscrew onto the link so the lift rod knob extends

1/2" (1.3 cm) above the lift rod hole.

Kohler Co.

Stopper Rod

Flange

Thumb

Nut

Screw

Seal

Link

Rod

Nut

Clip

1010448-2-F