Kohler K-1244 설치 매뉴얼 - 페이지 13

{카테고리_이름} Kohler K-1244에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-1244 48 페이지. Bath whirlpool
Kohler K-1244에 대해서도 마찬가지입니다: 주택 소유자 매뉴얼 (32 페이지), 주택 소유자 매뉴얼 (29 페이지), 주택 소유자 매뉴얼 (36 페이지), 주택 소유자 매뉴얼 (32 페이지), 설치 매뉴얼 (48 페이지), 설치 매뉴얼 (48 페이지), 설치 매뉴얼 (44 페이지), 설치 매뉴얼 (48 페이지), 설치 매뉴얼 (44 페이지), 주택 소유자 매뉴얼 (29 페이지), 설치 매뉴얼 (48 페이지)

Conﬁrm Proper Operation (cont.)

Press the power button on the user keypad.

Observe that the blower motor starts at a midrange speed.

Observe that air is blowing through all of the airjets.

Press the up button on the user keypad.

Verify that the air ﬂow increases.

Press the down button on the user keypad.

Verify that the air ﬂow decreases.

Press the power button on the keypad to stop the blower motor.

Conﬁrm Manual Purge Operation

Drain the bath.

When the bath has drained, press the purge button once.

Observe that the blower motor starts at low speed and blows any residual water from the air

channels.

Observe that air comes out of the airjets.

Verify that pressing the purge button again stops the blower motor.

Press the purge button to restart the manual purge.

Observe that the blower motor stops automatically after about two minutes.

Conﬁrm Automatic Purge Operation

Press the power button.

Press the power button again to turn off the blower. Note the time.

If ﬁlled, drain the bath.

Observe that the blower motor starts in the purge cycle after about 30 minutes.

Observe that the blower motor stops automatically after about two minutes.

Kohler Co.

1034591-2-F