Kohler K-1244 Installation Manual - Page 13

Browse online or download pdf Installation Manual for Bathroom Fixtures Kohler K-1244. Kohler K-1244 48 pages. Bath whirlpool
Also for Kohler K-1244: Homeowner's Manual (32 pages), Homeowner's Manual (29 pages), Homeowner's Manual (36 pages), Homeowner's Manual (32 pages), Installation Manual (48 pages), Installation Manual (48 pages), Installation Manual (44 pages), Installation Manual (48 pages), Installation Manual (44 pages), Homeowner's Manual (29 pages), Installation Manual (48 pages)

Print Page

Conﬁrm Proper Operation (cont.)

Press the power button on the user keypad.

Observe that the blower motor starts at a midrange speed.

Observe that air is blowing through all of the airjets.

Press the up button on the user keypad.

Verify that the air ﬂow increases.

Press the down button on the user keypad.

Verify that the air ﬂow decreases.

Press the power button on the keypad to stop the blower motor.

Conﬁrm Manual Purge Operation

Drain the bath.

When the bath has drained, press the purge button once.

Observe that the blower motor starts at low speed and blows any residual water from the air

channels.

Observe that air comes out of the airjets.

Verify that pressing the purge button again stops the blower motor.

Press the purge button to restart the manual purge.

Observe that the blower motor stops automatically after about two minutes.

Conﬁrm Automatic Purge Operation

Press the power button.

Press the power button again to turn off the blower. Note the time.

If ﬁlled, drain the bath.

Observe that the blower motor starts in the purge cycle after about 30 minutes.

Observe that the blower motor stops automatically after about two minutes.

Kohler Co.

1034591-2-F