Kohler K-1283 설치 매뉴얼 - 페이지 5
{카테고리_이름} Kohler K-1283에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-1283 17 페이지. Removable bath/ whirlpool aprons
Kohler K-1283에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 설치 지침 매뉴얼 (12 페이지)
페이지 인쇄
Secure Frame
Square
Frame
3. Complete the Installation
Secure Frame
Square the frame to the rim of the bath/whirlpool.
Secure the sides of the frame to the studs with the screws provided. Shim as necessary to fill any
gaps.
Secure the bottom of the frame to the subfloor with screws or floor anchors. Shim as necessary to fill
any gaps.
Secure the bottom of the frame to the subfloor with screws or floor anchors. Shim as necessary to fill
any gaps. Approximately 1/2" (1.3 cm) of shimming will be necessary if installing this apron to the
K-1266/K-1267 bath/whirlpool.
Thread the carriage bolt out until it makes contact with the bath/whirlpool. Then secure by
threading the nut up against the backside of the support structure.
Secure Panel
Center the panel on the frame. Press the panel onto the frame so that each of the fasteners engage.
Finish the Installation
Install water-resistant wall material [1-1/2" (3.8 cm) maximum thickness] to complete the finished
wall.
Install flooring material [2" (5.1 cm) maximum thickness] to complete the finished floor.
Service
Using a flat-blade screwdriver, gently pry the bottom of the apron panel away from the apron
frame.
Kohler Co.
Carriage Bolt
Bath/Whirlpool
Shim,
Support
if necessary.
Structure
Subfloor
Screw
Secure Panel
Fastener
Panel
5
Service
Panel
Flat-Blade
Screwdriver
Frame
Frame
1018323-2-C