Kohler K-1283 Kurulum Kılavuzu - Sayfa 5
Banyo Armatürleri Kohler K-1283 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Kohler K-1283 17 sayfaları. Removable bath/ whirlpool aprons
Ayrıca Kohler K-1283 için: Kurulum Kılavuzu (12 sayfalar), Kurulum Talimatları Kılavuzu (12 sayfalar)
Sayfayı Yazdır
Secure Frame
Square
Frame
3. Complete the Installation
Secure Frame
Square the frame to the rim of the bath/whirlpool.
Secure the sides of the frame to the studs with the screws provided. Shim as necessary to fill any
gaps.
Secure the bottom of the frame to the subfloor with screws or floor anchors. Shim as necessary to fill
any gaps.
Secure the bottom of the frame to the subfloor with screws or floor anchors. Shim as necessary to fill
any gaps. Approximately 1/2" (1.3 cm) of shimming will be necessary if installing this apron to the
K-1266/K-1267 bath/whirlpool.
Thread the carriage bolt out until it makes contact with the bath/whirlpool. Then secure by
threading the nut up against the backside of the support structure.
Secure Panel
Center the panel on the frame. Press the panel onto the frame so that each of the fasteners engage.
Finish the Installation
Install water-resistant wall material [1-1/2" (3.8 cm) maximum thickness] to complete the finished
wall.
Install flooring material [2" (5.1 cm) maximum thickness] to complete the finished floor.
Service
Using a flat-blade screwdriver, gently pry the bottom of the apron panel away from the apron
frame.
Kohler Co.
Carriage Bolt
Bath/Whirlpool
Shim,
Support
if necessary.
Structure
Subfloor
Screw
Secure Panel
Fastener
Panel
5
Service
Panel
Flat-Blade
Screwdriver
Frame
Frame
1018323-2-C