AEG LAVATHERM 57800 사용자 정보 - 페이지 25

{카테고리_이름} AEG LAVATHERM 57800에 대한 사용자 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG LAVATHERM 57800 32 페이지. Condensation dryer

3. Remove foil hose and polystyrene

padding from the machine.

Electrical connection

Details on mains voltage, type of current and the fuses required should

be taken from the rating plate. The rating plate is fitted near the load-

ing aperture (see "Description of machine" section).

Warning! The door may only be reversed by a specialist.

If necessary, please contact your local Service Force Centre.

Warning! Before reversing the door, disconnect the mains plug; with a

permanent connection: remove the fuse.

1. Open door.

2. Unscrew hinge A from the front of

the machine and take off the load-

ing door.

3. Carefully pry off cover plates B and

C. To do this, insert a thin screw-

driver into the slots as shown in the

illustration, press downwards

slightly and pry out the cover

plates.

4. Unfasten locking block D from the

snap-on fixture, take out and rein-

sert on the other side having rotat-

ed the block through 180°.

5. Unscrew hinge A from the loading

door, rotate through 180°, reinsert

on the opposite side and screw

down.