AEG LAVATHERM 57810 사용자 정보 - 페이지 23
{카테고리_이름} AEG LAVATHERM 57810에 대한 사용자 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG LAVATHERM 57810 32 페이지. Condensation dryer
AEG LAVATHERM 57810에 대해서도 마찬가지입니다: 사용자 정보 (32 페이지)
페이지 인쇄
Programming options
Objective
Permanently programme
in the audible signal
which reminds you that
the programme is com-
plete.
Adjust "level of dryness"
detection:
If the laundry is slightly
drier or slightly damper
at the end of the pro-
gramme than with the
standard setting.
To deactivate the EMPTY
WATER display when us-
ing an external drain for
the condensed water.
Implementation
1. Turn the programme selector to any programme.
2. Press the AUDIBLE SIGNAL button and hold down for
approx. 5 seconds.
A brief signal sounds several times. The AUDIBLE SIGNAL
display flashes several times.
The setting is permanently programmed.
The setting is cancelled as described under 1 and 2.
1. Turn the programme selector to any programme.
2. Press the AUDIBLE SIGNAL and SENSITIVE buttons at the
same time and hold down for approx. 5 seconds.
The current setting appears on the multi-display:
– C0: Setting for drier laundry
– C1: Standard setting
– C2: Setting for damper laundry
3. Press the START/PAUSE button until the setting required
appears on the multi-display.
4. Turn the programme selector to OFF.
The setting is permanently programmed.
1. Turn the programme selector to any programme.
2. Press the DOOR and SPECIAL CARE buttons at the same
time and hold down for approx. 5 seconds. The multi-
display briefly displays "0"
The EMPTY WATER display is permanently deactivated.
The setting is cancelled as described under 1 and 2; the
multi-display however briefly displays "1" (rather than
"0").
23