AEG LAVATHERM 59800 사용자 정보 - 페이지 29

{카테고리_이름} AEG LAVATHERM 59800에 대한 사용자 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG LAVATHERM 59800 36 페이지. Aeg condenser dryer with heat pump
AEG LAVATHERM 59800에 대해서도 마찬가지입니다: 사용자 정보 (32 페이지)

페이지 인쇄

Removing transport safety equipment

Caution! Before first starting up,

all parts of the transport safety

equipment must be removed.

1. Open loading door

2. Pull off adhesive strips from inside

machine on top of drum.

3. Remove foil hose and polystyrene

padding from the machine.

If the appliance was not transport-

ed in an upright position, leave it

to stand for 12 hours before con-

necting it to the electricity supply

and using it for the first time, so

that the oil can flow back to the

compressor. Otherwise the com-

pressor could be damaged.

Electrical connection

Details on mains voltage, type of current and the fuses required should

be taken from the type plate. The type plate is fitted near the loading

aperture (see "Machine description" section).

Important:

The plug must be accessible after the appliance has been installed.